Operation Manual

Chapter 6: Certify Fiber Cabling

Autotest in Smart Remote Mode

125

GPU118.EPS

Figure 48. Result for Smart Remote Mode

(Unsaved Bi-Directional Results Shown)

Note

The length shown for each fiber is half of the total

length of both fibers.

 The settings the tester used for the test.

 The dashed lines are around the connectors and fiber that are

included in the loss and length results. Gray connectors and

fibers are not included because you used them to set the

reference.

 Connector icons show the number you entered for the TOTAL

CONNECTIONS setting on the No. of Connectors/Splices

screen (Figure 44 on page 114). For Figure 48, the TOTAL

CONNECTIONS setting is 4.