Operation Manual

Versiv Cabling Certification Product Family
Users Manual
148
 Type A USB port: This USB host port lets you save test results
on a USB flash drive, connect the FI-1000 video probe to the
tester, and connect a Wi-Fi adapter for access to Fluke Networks
cloud services.
 Headset jack.
 : Starts a test. To start a test, you can also tap TEST on
the display.
 : Power key.
 : Press  to go to the home screen.
 Connector for the AC adapter. The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See “Charge
the Battery” on page 12.
 RJ45 connector: Lets you connect to a network for access to
Fluke Networks cloud services.
 Decal with laser
safety information:
How to Remove and Install the Connector
Adapters
You can change the connector adapters on the OTDR ports of the
modules to connect to SC, ST, LC, and FC fiber connectors. You
can remove the adapter also to clean the fiber endface in the
port. See Figure 56.