Operation Manual

Versiv Cabling Certification Product Family
Users Manual
170
Event Table
The event table shows a list of the events on the fiber. To see the
event table, tap TABLE on the OTDR results screen. Figure 67
shows an example of an event table.
 To see details for an event, tap the event in the table. Scroll the
table if necessary to see all the events.
 (ft) or (m): The distance to the event
 LOSS: The loss of the event.
 REFLECT: The reflectance of the event.
 TYPE: The event type.
Note
The OTDR Port and End events always show N/A
for loss because backscatter measurements are
not available on both sides of those events.
 Tap to see help for this screen.
 OVERALL: Tap this button to see overall measurements of
length, loss, and optical return loss for the fiber.
 When more than one button shows at the bottom of the
screen, the tester highlights one in yellow to recommend
which one to tap. See “Buttons to Do Tests and Save Results”
on page 18.
 If the tester made measurements at two wavelengths, tap the
arrow buttons to see results for the other wavelength.
Possibly, some events show only at one wavelength.
 : The measurement is within the limit.
: The measurement exceeds the limit.
: The tester does not give a pass or fail result to the event. This
occurs for OTDR Port, Hidden, and End events. This occurs for all
events if you use the Document Only test limit because
Document Only does not have values for limits.