Operation Manual

Chapter 1: Get Acquainted
Safety Information
7
regulations and return the product for service as
applicable.
 The battery door must be closed and locked before
you operate the Product.
 Repair the Product before use if the battery leaks.
 Recharge the batteries when the low battery
indicator shows to prevent incorrect measurements.
 Turn off the Product and disconnect all test leads,
patch cords, and cables before you replace the
battery.
 Do not disassemble or crush battery cells and
battery packs.
 Do not put battery cells and battery packs near heat
or fire. Do not put in direct sunlight.
 Have an approved technician repair the Product.
 Use only AC adapters approved by Fluke Networks
for use with the Product to supply power to the
Product and charge the battery.