Operation Manual

Versiv Cabling Certification Product Family

Users Manual

196

Figure 80. Equipment for Power Meter Measurements

To monitor power

1 Clean and inspect the tester’s input port and the connectors

on the source and test reference cord.

2 Connect the tester to the source, as shown in Figure 81.

3 Turn on the source. On a CertiFiber Pro module, hold down

the button adjacent to the VFL port for 3 seconds.

4 On the home screen, tap TOOLS, then tap Power Meter /

Light Source.

5 The default mode for the power meter is Auto CertiFiber Pro.

If the source is not a CertiFiber Pro tester, tap  to select the

correct mode.

Figure 82 shows the power meter and its controls.

GPU137EPS

 Versiv main unit with CertiFiber

Pro module installed

 One test reference cord

 Fiber cleaning supplies

 FI-1000 video probe with USB

connector

 AC adapter with line cords

(optional)