Operation Manual

Chapter 10: Manage Test Results
View Saved Results
205
Note
These numbers show the total number of results
that passed and failed in the IDs saved. So, the
numbers can be more than the number of IDs
saved.
 The cable IDs that have FAIL results and must be tested again.
Because some IDs can have one or more tests that failed, the
number at the top of this screen (
) can be more than the
number of retests needed.
 The cable IDs that have an overall PASS or result. Because
some IDs can have one or more tests that passed or have an
status, the number at the top of this screen (
) can be more
than the number of passes.
IDs that start with “TRC” are from verification tests on test
reference cords. These IDs show the date and time of the test.
 Tap VIEW ALL to see a summary of the results in all the projects
in the tester.
 TRANSFER lets you export or import results to or from a flash
drive and delete results on the flash drive.
 MANAGE lets you move results to a different project, rename
results, or delete results that are in the tester.
 The icons show the types of fiber test results that the result
contains:
No icon: DSX CableAnalyzer results from copper cabling.
Loss/length results from a CertiFiber Pro OLTS module.
OptiFiber Pro OTDR results from End 2 and End 1. The
result can be from an Auto, Manual, SmartLoop, or
DataCenter OTDR test.
Averaged results from a bi-directional OTDR test.