Operation Manual

Chapter 13: Maintenance
Traceable Calibration Period
235
Traceable Calibration Period
To make sure that the modules operate within the published
specifications for accuracy, have them calibrated at a Fluke
Networks authorized service center every 12 months.
See Information About the Tester
To see information about your tester and attached modules and
adapters
On the home screen, tap the TOOLS icon, then tap Version
Information.
To see information about a remote tester
Use DSX or CertiFiber Pro modules and patch cords to connect the
main and remote testers together (see Figure 2 on page 15), then
tap REMOTE on the Version Information screen.
Update the Software
New software gives you access to new features and the latest test
limits and cable types. Software updates are available on the
Fluke Networks website.
You can use a PC to install a software update, or connect an
updated main unit to a remote or to another main unit to update
those units.
You can also use LinkWare Live to download a software update
from the cloud to your main tester, then use the main tester and
a USB cable to install the update in the remote.