Operation Manual

Versiv Cabling Certification Product Family
Users Manual
236
Use a PC to Update the Software
Caution
To prevent unexpected loss of power, connect the
ac adapter to the tester when you update the
software.
Note
The software update procedure does not delete
the test records, project settings, or user
preferences in the tester, but can possibly change
the factory-installed cable types or test limits.
1 Install the latest version of LinkWare PC software on your PC.
LinkWare PC is available on the Fluke Networks website.
2 Connect the AC adapter to the tester and connect the
Micro-AB USB port on the tester to a type A USB port on the
PC. See Figure 89.
3 LinkWare PC automatically tells you if new software for the
tester is available on the Fluke Networks website, and lets you
install the software.
Note
Older versions of LinkWare PC do not start the
update procedure automatically. For older
versions, you must have the Versiv update file on a
disk or USB drive and click to start the update
procedure.
4 The tester reboots when the update is completed. To make sure
the update was installed correctly, tap the TOOLS icon on the
home screen, tap Version Information, then make sure the
Versiv main unit and the module show the correct version.
5 Do steps 2 through 4 again for the remote. On a remote
tester, the LEDs show the progress of the installation.