Operation Manual

Versiv Cabling Certification Product Family
Users Manual
238
Use an Updated Main Tester to Update Other Testers
1 Turn on both testers and connect the AC adapters to both
testers.
2 Use the USB cable provided to connect the updated main unit
to the remote or to another main. See Figure 90.
3 Follow the instructions shown on the display of the updated
main unit.
Note
If a remote has newer software than the main
unit, the main unit can install the older software
in the remote so that you can use the two units
together. The remote cannot install the newer
software in the main unit.
Use LinkWare Live to Update the Software
1 Use an appropriate cable to connect the tester’s RJ45 Ethernet
port to a network port or connect a Wi-Fi adapter to the
tester’s type A USB port.
2 Go to the home screen, tap the RESULTS icon, then tap
TRANSFER.
3 On the TRANSFER RESULTS screen, tap the LinkWare Live
panel.
4 On the SIGN IN screen, enter the ID and password for your
LinkWare Live account, then tap SIGN IN.
5 If a Versiv software update is available, the tester shows a
message. Tap YES to install new software in your tester.
6 The tester reboots when the update is completed.
7 To install the update in a remote or another main tester, use
the USB cable provided to connect the updated main tester to
the other tester. See Figure 90.
8 Follow the instructions shown on the display of the updated
main tester.