Operation Manual

Chapter 2: Certify Twisted Pair Cabling
Connectors, Keys, and LEDs
27
 : Starts a test. Turns on the tone generator if a remote
tester is not connected to the main tester. To start a test, you
can also tap TEST on the display.
 : Power key
 : Press  to go to the home screen.
 Connector for the AC adapter. The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See “Charge
the Battery” on page 12.
 RJ45 connector: Lets you connect to a network for access to
Fluke Networks cloud services.
 Micro-AB USB port: This USB port lets you connect the tester
to a PC so you can upload test results to the PC and install
software updates in the tester.
 Type A USB port: This USB host port lets you save test results
on a USB flash drive, connect the FI-1000 video probe to the
tester, and connect a Wi-Fi adapter for access to Fluke Networks
cloud services.
 Headset jack
Note
If you have two main testers, you can use one as a
remote. To select the remote function, tap TOOLS
> Main as Remote.