Operation Manual

Versiv Cabling Certification Product Family
Users Manual
38
3 If you attached Class F/F
A
link interface adapters, make sure
you select a Class F or F
A
test limit. See the documentation
supplied with the adapters.
4 On the home screen, tap TOOLS, then tap Set Reference.
5 On the SET REFERENCE screen tap TEST.
GPU89.EPS
Figure 13. Reference Connections for Twisted Pair Cable
Settings for Twisted Pair Tests
Table 2 gives descriptions of the settings for twisted pair tests. To
set up a project, which includes the settings in Table 2, cable IDs,
and operator names, see Chapter 11.
To set up a twisted pair test
1 On the home screen, tap the test setup panel.
2 On the CHANGE TEST screen, select a twisted pair test to
change, then tap EDIT.
Or to set up a new twisted pair test, tap NEW TEST. If no module
is installed, the MODULE screen shows. Tap the correct copper
module.
Permanent link
adapter
Channel
adapter