Operation Manual

Chapter 5: Inspect Fiber Endfaces

Connectors, Keys, and LEDs

You can use the FiberInspector function with any module

installed and with no module installed.

 Micro-AB USB port: This USB port lets you connect the tester to a

PC so you can upload test results to the PC and install software

updates in the tester.

 Type A USB port: This USB host port lets you connect the FI-7000

video probe to the tester, save test results on a USB flash drive,

and connect a Wi-Fi adapter for access to Fluke Networks cloud

services.

 Headset jack.

 : Starts a test. To start a test, you can also tap TEST on the

display.

 Power key.

 : Press  to go to the home screen.

 Connector for the ac adapter.

 RJ45 connector: Lets you connect to a network for access to Fluke

Networks cloud services.

 Removable tip for different types of connectors.

 Dial for focus adjustment.

Note

The button on the bottom of the FI-1000 probe

has no function when you use the probe with a

Versiv tester.