Operation Manual

Versiv Cabling Certification Product Family

Users Manual

Settings for FiberInspector Tests

Table 5 gives descriptions of the settings for FiberInspector tests.

To set up a project, which includes the settings in Table 5, cable

IDs, and operator names, see Chapter 11.

To set up a FiberInspector test

1 On the home screen, tap the test setup panel.

2 On the CHANGE TEST screen, select a FiberInspector test, then

tap EDIT.

Or to set up a new FiberInspector test, tap NEW TEST. If no

module is installed, the MODULE screen shows. Tap

FiberInspector or FI-7000.

3 On the TEST SETUP screen, tap the panels to change settings

for the test. See Table 5.

4 On the TEST SETUP screen, tap SAVE when your test setup is

completed.

5 On the CHANGE TEST screen, make sure the button next to

the test is selected, then tap USE SELECTED.

Table 5. Settings for FiberInspector Tests

Setting Description

Module Select a CertiFiber Pro or OptiFiber Pro module or

FI-7000.

Test Type Select FiberInspector.

Test Limit To give images a PASS or FAIL result manually, select

Manual. Or, select a limit to compare scratches and

defects to specific criteria for size and location.

To see a different group of limits, tap MORE, then tap

the name of a group. To make a custom limit, tap

Custom in the Limit Groups list. See the Technical

Reference Handbook.