User's Manual
Fluke 125
Getting Started
8
Scope Measurements on Input A and B
Choose ac voltage (Vac) measurement for Input A:
Open the A MEASUREMENTS menu.
Highlight Vac.
Press ENTER to confirm the selection.
Observe that Vac (rms V∼) is now the Main Reading. The
former Main Reading has now moved to the smaller
Secondary Reading Position. Figure 5 shows this.
Then choose Peak-to-Peak Reading for Input B:
Open the B MEASUREMENTS menu.
Highlight ON.
Turn INPUT B on.
Highlight PEAK ... .
Open the PEAK Submenu.
Highlight PEAK-PEAK.
Press ENTER to confirm the selection.
Now you will see a screen like in Figure 5. The A and B
traces give a graphical representation of the waveforms
applied to Input A and Input B.
Figure 5. Measurements on Input A and Input B