User's Manual

Getting Started
Scope/Meter Measurements
9
Changing the Waveform Representation
Changing the amplitude:
Enlarge or reduce the waveform amplitude;
there are separate keys for Input A and
Input B.
Changing the Time Base:
Increase or decrease the number of
periods.
Positioning the traces:
Select A MOVE or B MOVE.
Position the selected waveform to the
desired screen position.
Trigger adjustments:
Triggering tells the Test Tool when to begin displaying the
waveform. The trigger point on the waveform is indicated
by the Trigger Identifier (
). Trigger Level and the Trigger
Slope can be adjusted to your personal taste. This may
help to get certain signal details within the viewing area:
Enables the arrow keys for Trigger Level
and Slope.
Adjust the Trigger Level.
Select Negative / Positive Slope.
Making Cursor Measurements
Cursors allow you to make precise digital measurements
on live and on saved waveforms.
Display the cursor key functions:
Select Cursor measurement type:
Measure signal height at one point of time.
Measure signal height difference between
two points of time and measure time
difference between these two points.
Measure signal height at the cursor
positions and between cursor positions.
Measure rise time or fall time.