User's Manual

Fluke 125

Getting Started

Bus Health Screen Softkey Functions

The bus health screen shows a softkey button bar like the

one shown below:

Select the Limit Setup function, see below.

Select the voltage level reading.

Select the distortion type reading.

Display the signal eye-pattern.

Setting up the Limits

To set up the test limits of the current bus type, do the

following:

Select the SETUP LIMITS… menu from the

bus health screen.

Select the signal property.

Select the LOW, HIGH, or WARNING level.

Change the limit. Continue with other limits.

Press DEFAULTS to set all limits to

the default value.

Accept the limits.

To save and recall saved test limit sets see SAVE / PRINT

Functions on page 16.