User Manual

1587/1577

Users Manual

Accessories

Model Leads Probes Clips Holster Hard Case

K Type

Thermocouple

Remote

Probe

1587 TL224 TP74 AC285 Yes Yes Yes Yes

1577 TL224 TL74 AC285 Yes Yes No Yes

Unsafe Voltage

To alert you to the presence of a potentially hazardous

voltage, when the Meter detects a voltage ≥ 30 V or a

voltage overload (OL), the Z symbol is displayed.

Test Lead Alert

To remind you to check that the test leads are in the

correct terminals,

LEAd

is momentarily displayed when you

move the rotary switch to or from the c position.

XW Warning

To avoid a blown fuse, damage to the Meter,

or serious personal injury, never attempt to

make a measurement with a test lead in an

incorrect terminal.

Battery Saver (Sleep Mode)

The Meter enters the “Sleep mode” and blanks the display

if there is no function change or button press for

20 minutes. This done to conserve battery power. The

Meter comes out of Sleep mode when a key is pressed or

when the rotary switched is turned to the OFF position and

then back on.

To disable the Sleep mode, hold down the blue button

while turning the Meter on. Sleep mode is always disabled

in the MIN MAX AVG recording mode, AutoHold mode,

insulation test active, or if the auto power off feature has

been disabled by pressing the blue button when the Meter

is turned on.