User's Manual

ManualsBrandsFluke ManualsPower Supply1744

Manual Supplement

Manual Title: 1744/1743 Users Supplement Issue: 7

Part Number: 2560353 Issue Date: 5/14

Print Date: April 2006 Page Count: 5

Revision/Date: 1, 6/06

This supplement contains information

necessary to ensure the accuracy of

the above manual.

Summary of content (6 pages)

PAGE 1
Manual Supplement Manual Title: 1744/1743 Users Part Number: 2560353 Print Date: April 2006 Revision/Date: 1, 6/06 Supplement Issue: 7 Issue Date: 5/14 Page Count: 5 This supplement contains information necessary to ensure the accuracy of the above manual. © 2011-2014 Fluke Corporation. All rights reserved.
PAGE 2
1744/1743 Users Manual Supplement Change #1 On page 7, replace Table 2 with: Table 2.
PAGE 3
Manual Supplement 1744/1743 Users Change #2 On page 4, add the following symbol to Table 1:  Do not apply around or remove from the Hazardous Live conductors. On page 7, replace Table 3 with: Table 3.
PAGE 4
1744/1743 Users Manual Supplement Change #3 On page 15, under Connecting the Logger, add the following text and Figure:  To avoid shock or personal injury, keep fingers behind the tactile barrier, see the figure. Single Insulated Current Carrying Conductor AC 60 Release Button C U 0 V R R EN C AT SE R IA L T III Load Direction Arrow i5 C s LA N M U P M BE R Tactile Barrier cab01.
PAGE 5
Manual Supplement 1744/1743 Users Change #4 On page 17, following the Note, add: Operating Instructions 1. Connect the Probe to the 1743/44 via the current input socket. 2. Wear protective equipment or de-energize the circuit and place the Probe around the conductor under test. To lock the coil, see the Figure. 3. Re-energize the circuit. 4. Observe and take measurements as required. Positive output indicates that the current flow is in the direction shown by the arrow on the Probe. 5.
PAGE 6
1744/1743 Users Manual Supplement On page 48, under General Information in Reference conditions replace Power Supply with: Power supply: 100 to 600 V AC 10 % On page 48, under Environmental Specifications, remove Protection, Safety, Type test voltage and the EMC section and replace with: Safety IEC 61010-2-030: Measurement 600 V CAT III/ 300 V CAT IV Altitude Operating 2000 m IP Rating IEC 60529: IP65 Electromagnetic Environment IEC 61326-1: Portable, Class B Electromagnetic Compatibility Appli