Data Sheet

ManualsBrandsFluke ManualsPower and Energy LoggersFluke 1750-TF

Technical Data

• Power quality that meets the standard:

All measurements comply with IEC61000-4-30

standards for correct evaluation of all measured

values including voltage, current, power, har-

monics, ﬂicker etc.

• Wireless interface: Included Android tablet

allows for quick setup and veriﬁcation with

waveform displays, meter screens, and phasor

diagrams.

• Quick and reliable conﬁguration: Android

tablet wireless “front panel interface” provides

the ability to verify setup without a laptop along

with a window into what the instrument is

recording, even in awkward test locations.

• Threshold-free setup: Apply thresholds after

data is collected with Fluke Power Analyze

Software so there is no need to worry about

missed information due to incorrect set-up.

• Captures everything: Cross-channel and cur-

rent triggering capture every measurement, on

every channel, every time.

• Intuitive PC software: Easily analyze data and

generate reports. Automated EN50160 reporting

and compliance.

Capture every measurement, every

event, on every cycle, all the time

with the Fluke 1750 Power Recorder.

Outstanding accuracy and resolution

provide complete visibility into your

installation or distribution system.

Fluke 1750

Three-Phase Power Recorder

Never miss capturing a

disturbance—with the exclusive

threshold-free measurement

system, it’s automatic.

• Plug and play: Set up in minutes with self-

identifying current probes and single-lead

voltage connections.

• No need to reconnect wires: Swap channels

internally with the wireless front panel or PC

when connections are not correct.

• Measure every parameter: voltage and current

on three phases, neutral, and ground.

• 5 MHz, 8000 Vpk waveform capture: Get a

detailed picture of even the shortest events.

• Quickly retrieve data: With included SD

memory card or via the 100BaseT ethernet

connection.

Summary of content (8 pages)

PAGE 1
Fluke 1750 Three-Phase Power Recorder Technical Data Technical Data Never miss capturing a disturbance—with the exclusive threshold-free measurement system, it’s automatic. Capture every measurement, every event, on every cycle, all the time with the Fluke 1750 Power Recorder. Outstanding accuracy and resolution provide complete visibility into your installation or distribution system.
PAGE 2
Applications Long-term analysis Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction Power quality surveys Quantify power quality throughout a facility, documenting results with professional reports Quality of service compliance Validate incoming power quality at the service entrance Equipment Installation/Commissioning Benchmark power system prior to install to insure quality of service Easy to use The recorder auto
PAGE 3
Comprehensive power system data Every cycle on every channel is simultaneously sampled providing complete analysis of power quality, harmonics, power and energy. Crosschannel current and voltage triggering captures event data on all input channels simultaneously, no matter which channel triggered the event. When periodic analysis of the waveform may be needed, the Snapshot mode captures waveforms at user-defined intervals.
PAGE 4
View data the way you want The new Fluke Power Analyze software revolutionizes your ability to analyze data. No need to worry about thresholds—with Fluke Power Analyze, thresholds can be modified after the data is recorded! And the easy-to-use user interface will display voltage as a phase-to-phase or phase-toneutral reading. Apply thresholds to data after collection using a variety of standard or customized templates.
PAGE 5
Optional accessories Fluke power quality current transformers and flexible current probes are specially designed to work seamlessly with Fluke power monitors (1750 and 1650). All clampon and flexi-CT’s are matched to take full advantage of your instrument’s ability to set scale factors for accurate readings. Cases 1750/CASE Transit Case • Rugged water tight transit case with rollers Model no. i5S-PR i40S-PR 3140R CT type Clamp-On Clamp-On Clamp-On Current range 0.01 A to 5 A 0.
PAGE 6
Specifications for the System: Recorder and Power Analyze Software General Power quality measurement standards Conformance Clock/calendar Real-time clock accuracy Internal memory capacity for data Maximum recording period Measurement time control Maximum number of events Power requirements Operating time during interruptions IEC 61999-1-4 Class 1, IEC 61000-4-30 (Class A or Class S depending on measurement function), IEEE519, IEEE1159, IEEE1459 and EN50160 Leap years, 24-hour clock Not more than ± 1 s/day
PAGE 7
Transient voltage (impulse) Measurement type Full scale Sample resolution Measurement uncertainty Waveshape sampling 8000 V pk 200 nS ± 5 % reading ± 20 V (test parameters: 1000 V dc, 1000 V rms, 100 kHz) Dip (sag) and swell measurements Voltage swell (rms swell) Measurement type Displayed data Measurement uncertainty True rms (one cycle calculation by overlapping each half cycle—voltage between lines is measured for 3P3W lines and phase voltage is measured for 3P4W lines) Amplitude and duration of swell
PAGE 8
External interface specifications LAN interface Connector Speed and type Communications protocol RJ-45 10/100 Base-T, auto MDIX TCP/IP over ethernet Wireless controller interface Connection Speed Communications protocol wireless (2.