User's Manual

3110-PR English Instruction Sheet
Page 2
Symbols
The table below lists the symbols used on the Probe and/or in
this instruction sheet.
Symbol Description
~
Do not dispose of this product as unsorted municipal
waste. Go to Fluke’s website for recycling information.
W
Risk of Danger. Important Information. See manual.
X
Hazardous Voltage. Risk of electric shock.
T
Double insulation.
-
Do not apply to or remove from hazardous, live
conductors.
)
Canadian Standards Association: Conforms to relevant
Canadian and U.S. standards.
P
Complies with the relevant European standards.
;
Conforms to relevant Australian standards.
Safety Instructions
Please read this section carefully. It will familiarize you with the
most important safety instructions for handling the Probe. In this
instruction sheet, a Warning identifies conditions and actions
that pose hazard(s) to the user. A Caution identifies conditions
and actions that may damage the calibrator or the test
instruments.
WX Warning
The Probe may only be used and handled by
qualified personnel. To avoid electric shock or
personal injury, follow these precautions:
• Do not apply to or remove from hazardous live
conductors without taking additional protective
measures.
• De-energize circuit during installation and
removal of Probe.
• High voltages and currents may be present in
adjacent circuits under test.
• Do not use the Probe if damaged. Always
connect to display device before it is installed
around the conductor.