User's Manual

3110-PR English Instruction Sheet
Page 4
General Characteristics
Probe and Cable Material
Alcryn 2070NC, reinforced
insulation, UL94 V0, Color: RED
Couplings Material Lati Latamid 6H-V0 Nylon
Probe Cable Length 24 in. (610 mm)
Probe Cable Diameter 0.49 in. (12.4 mm)
Transducer Bend Radius (min) 1.5 in. (38.1 mm)
Output Cable 2 core screened, 3 meters long
Output Connector LEMO 6 pin male connector
Operating Temperature Range -4 to +194 °F (-20 to +90 °C)
Storage Temperature Range -40 to 221 °F (-40 to +105 °C)
Operating Humidity 15 % to 85 % (non condensing)
Degree of protection IP40
Safety Standards
• EN/IEC 61010-1 2001
• EN/IEC 61010-032
• Pollution Degree 2
Use of the Probe on uninsulated conductors is limited to 1000 V
ac rms or dc and frequencies below 1 kHz.
Please note that the safety rating for the output to ground is
limited to 30 V ac rms or dc by the connector specified.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship
for one year from the date of purchase. This warranty does not cover
fuses, disposable batteries, or damage from accident, neglect, misuse,
alteration, contamination, or abnormal conditions of operation or
handling. Resellers are not authorized to extend any other warranty on
Fluke’s behalf. To obtain service during the warranty period, contact your
nearest Fluke authorized service center to obtain return authorization
information, then send the product to that Service Center with a
description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE,
ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some
states or countries do not allow the exclusion or limitation of an implied
warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99