User's Manual

To clean user-accessible configuration data in the EEPROM:
1. Using FPA, connect to the Power Recorder to be cleaned.
2. Click the 1750 Setup button as shown.
3. Type some non-empty string in the “Recorder Name” field (e.g., change
“1750 Power Recorder <218>” to “0”).
4. Restore Swap Connections settings back to defaults: set both Volts and
Amps to A-A, B-B, C-C, N-N, G-G (or L1-L1, L2-L2, L3-L3, N-N, G-G).
5. Restore the Voltage/Current Ratio defaults to 1:1.
6. Click Apply.
7. Click OK to the “Settings saved” dialog.
Note
The following steps will make the Power Recorder
inaccessible via the Ethernet connection.
1750 SOMV 4 of 13 6/7/2007