Brochure
Connect-and-View
™
triggering for an instant,
stable display
If you’ve used other scopes, you
know how tricky triggering can
be. If settings are
incorrect, results
can be unstable or
incorrect. Connect-and-View
™
automatically sets up correct
triggering by recognizing signal
patterns. Without touching a
button, you get a stable, reli-
able and repeatable display of
virtually any signal including
motor drive and control signals.
It’s especially fast and conve-
nient when you’re measuring a
number of test points in rapid
succession.
Built-in digital multimeter
Conveniently switch from
waveform analysis to precise
multimeter measurements using
the built in 5000 count digi-
tal multimeter. Measurement
functions include Vdc, Vac,
Vac+dc, resistance, continuity
and diode test. Measure current
and temperature using suitable
shunt, probe or adapter with
wide range of scaling factors.
ScopeRecord™ mode for
high resolution waveform
recording up to 48 hours
ScopeRecord™ memory stores up
to 30,000 or more data points
per channel, capturing fast inter-
mittents and glitches as short
as 8 ns. (Two sets of multiple-
channel recordings can be
stored for later analysis.)
• Records events like motion
profiles and UPS, power supply
or motor start-up cycles
• With the Stop on Trigger
mode, the ScopeMeter
®
test
tool automatically recognizes
a power failure and stores the
waveform data preceding it
TrendPlot™ paperless
recorder—records up to
22 days to help you find
intermittent faults
The toughest faults to find are
those that happen once in a
while. These intermittents can
be caused by bad connections,
dust, dirt, corrosion, or simply
broken wiring or connectors.
Line outages, sags or starting
and stopping of a motor can
also cause a machine to stop.
You may not be around when
it happens, but the Fluke
ScopeMeter
®
test tool will be.
• Plot minimum and maximum
peak values and average over
time up to 22 days
• Plot any combination of volt-
ages, amps, temperature,
frequency and phase for all
inputs, all with time and date
stamp to pinpoint faults
Capture high-resolution waveform
details over extended period using
ScopeRecord
™
mode.
Fluke ScopeMeter
®
test tools work
harder to make
your job easier
See what’s happening with fast
real-time high resolution sampling.
ScopeMeter
®
portable oscilloscopes
offer a sample rate of up to 5 GS/s
with up to 200 ps resolution.
The built in multimeter provides conve-
nient precision measurements.
Trend multiple measurements captur-
ing signal intermittent events, signal
drift or fluctuations.
Connect-and-View
™ captures even the
most complex motor drive signals.
6