Brochure

ManualsBrandsFluke ManualsPortable OscilloscopesFluke 190-204

Powerful ScopeMeter

test capabilities:

•

From 20 to 200 MHz bandwidth and up to 2.5 GS/s real-time sampling

•

Up to seven hours operating time

•

Now with FFT Analysis, advanced triggering and 3k memory length

Oscilloscopes for

field applications

Summary of content (5 pages)

PAGE 1
Oscilloscopes for field applications Powerful ScopeMeter® test capabilities: • From 20 to 200 MHz bandwidth and up to 2.
PAGE 2
All this power in your hand See dynamic signal behavior instantaneously Thanks to the deeper memory, very small parts of the waveform can be studied in full detail using “zoom”. Deeper waveform acquisition memory The waveform memory of all oscilloscopes in both the 190B and 190C Series has been enlarged to allow as many as 3000 samples per channel to be acquired.
PAGE 3
ScopeMeter® 120 and 190 Series common functions Software and special value kits. ScopeMeter 190 Series ® The inrush current is measured on the part of the waveform enclosed by the cursors. Cursor-limited automatic measurement ScopeMeter 190C and 190B features 30 automatic measurements, cursors, zoom and real-time clock.
PAGE 4
New! Fluke 125 Industrial ScopeMeter® In today’s complex systems, a meter measurement just doesn’t give enough detail to determine the cause of a fault. Signal anomalies, dropouts and glitches that might cause a machine to go down are best captured with an oscilloscope. The ScopeMeter 120 Series meets today’s need of simultaneously measuring and checking waveforms. The unique Connect-and-View™ triggering automatically displays stable waveforms of virtually any signal.
PAGE 5
Selection Table 120 and 190 Series ScopeMeter® Test Tools Bandwidth Max. real time sample rate Equivalent time sample rate Max. record length (per input) Number of inputs Input sensitivity Independently floating isolated inputs Display and Display Modes Display Persistence Fluke 125 40 MHz 25 MS/s 2.5 GS/s 120 Series Fluke 124 Fluke 123 40 MHz 20 MHz 25 MS/s 25 MS/s 2.5 GS/s 1.25 GS/s 512 points (min/max pairs) 2 scope or DMM inputs 5 mV/div. to 50 V/div.