Brochure

Recommended oil and gas solutions
More recommended oil and gas solutions
Power quality
analyzers
Best suited for:
• Finding power quality
problems before
they damage critical
equipment
• Conducting load studies
to reduce energy usage
applications
Oil and gas applications:
Generators, harmonics
(electronics), load studies
Thermal imagers
Best suited for:
• Providing non-contact
measurement and dis-
play of a visual image of
surface temperatures to
easily and safely iden-
tify potential problems
• Reducing the need for
unplanned maintenance
to correct previous
repairs
Oil and gas applications:
Steam trap leakage,
electrical panels,
motors, VFDs,
tank level
and sludge
level
indication,
refractory,
furnaces,
reformers,
transformers,
and pumps
Clamp meters
Best suited for:
• Measure 1000 A ac or
dc with fixed jaw to
measure current in mo-
tors, vaults and bus bars
• Clamp around bus bars
or conductors in service
panels to measure loads
and line frequency in
circuits
Oil and gas applications:
Pumps, compressors,
motors, fans, and blowers
Infrared
thermometers
Best suited for:
• Gathering surface
temperature readings
• Reducing the need for
unplanned maintenance
to correct previous
repairs
Oil and gas applications:
Heating, motors, HVAC,
circuit breaker inspection
Petrochemical professionals can
nd application notes, case studies
and demos of Fluke solutions at
www.uke.com/oilandgas
Process tools
Best suited for:
Troubleshooting and calibrating current loop applications using
the functionality of a loop calibrator and digital multimeter built
into one tool.
Oil and gas applications:
Measure, source, and simulate dc loop current
Documenting
process calibrators
Best suited for:
• Calibration and
maintenance of process
instrumentation and
control systems.
• Sourcing, measuring and
documenting virtually
any process variable
Oil and gas applications:
Pressure and temperature
transmitter calibration;
calibration and configu-
ration of HART devices;
documenting field
calibrations for recall and
upload
Pressure
calibrators
Best suited for:
• Pressure calibration of
transmitters, gauges,
switches, and custody
transfer meters
• Maintenance of
almost any pressure
device using pressure
sourcing and milliamp
measurements
• Calibrating P/I
instruments with
simultaneous
pressure and current
measurement
Oil and gas applications:
Pressure
measurements
using internal
sensor;
measure mA
while sourc-
ing 24 V loop
power
Temperature
calibrators
Best suited for:
• Troubleshooting and
calibrating temperature
• Testing temperature
sensors and transmitters
• Measuring and sourc-
ing thermocouples and
RTD’s
Oil and gas applications:
Measure thermocouples,
ohms, and volts to test
sensors and transmitters;
calibrate transmitters by
sourcing/simulating ther-
mocouples, RTDs, volts,
and ohms;
powering
transmitters
during test us-
ing loop power
supply with
simultaneous
mA
measurement
mA Process
clamp meters
Best suited for:
• Measuring 4 to 20 mA
signals without
breaking the loop
• Sourcing, simulating
and measuring mA
• Sourcing, measuring
DC voltage
Oil and gas applications:
mA sourcing, simulation
and measurement;
loop calibration,
maintenance and repair
Insulation
multimeters
Best suited for:
• Testing a wide range
of insulation resistance
and digital multimeter
tests including simple
spot checks to timed
tests
• Troubleshooting and
preventive maintenance
Oil and gas applications:
Switchgear, motors,
variable speed drives,
generators, electrical
systems and cables;
test voltages from 50 V
to 1000 V
(Insulation
tester to
5000 V also
available)
Handheld
oscilloscopes
Best suited for:
• Troubleshooting and
installation applications
• Finding fast answers to
problems in machinery,
instrumentation, control
and power systems
• Bus health testing for
industrial bus systems
Oil and gas applications:
Pumps, compressors,
motors, fans, and blowers
Vibration
testers
Best suited for:
• Diagnosing machine
faults to extend machine
life and reduce costs
• Reducing unexpected
serious failures to help
prevent production
stoppages that cut into
the bottom line
• Giving maintenance
staff time to schedule
repairs and acquire
parts
• Anticipating problem
areas before failure
Oil and gas applications:
Pumps, compressors,
motors, fans, and blowers
Visual IR
thermometers
Best suited for:
• Displaying a visual
heat map of surface
temperatures
• Finding heating and
ventilation problems
• Non-contact monitoring
of pumps, electrical
motors and panels
• Reducing the need for
unplanned maintenance
to correct previous
repairs
Oil and gas applications:
Valve pack-
ing leakage,
non-contact
electrical
panel inspec-
tion, pump
and motor
inspection
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com
©2007-2014 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 1/2014 3106077D_EN
Modification of this document is not permitted
without written permission from Fluke Corporation.
Fluke. The Most Trusted Tools
in the World.
Fluke. Working to keep the
oil and gas industry owing.
Intrinsically Safe Test Tools and Standards
North American rating
Division 1 Division 2
Eu r o pe a n ATE x
Zone 0 Zone 1 Zone 2
Gas Presence
≥1000 hours/year >10 hours,< 1000
hours/year
> 1 hour,
< 10 hours/year
Certification Fluke
products
Main
application
707Ex Loop
Calibrator
Source and
measure mA signals
All Gases
718E x
Pressure
Calibrator
Calibrate pressure
transmittters
and switches
All Gases
725Ex
Multifunction
Calibrator
Calibrate
almost any
process device
Gases
(North American gas groups B,C,D)
(ATEx gas groups IIB)
87V- Ex
Industrial Ex
Multimeter
True-rms
IEC-1010 CAT IV
600 V rating
All Gases
Pressure
Enabled
How do you know if the
combination of test tool and
device under test is safe?
Visit www.fluke.com/ex
and order a free intrinsically
safe training CD
Fluke solutions can help you maintain
operational reliability and environmental safety
Fluke understands the petrochemical industry faces a range of challenges from dynamic market fluctua-
tions to multiple stringent regulatory requirements, and downtime and inaccurate measurements can
cost millions. The professionals that work in oil and gas know it is critical to maintain stable, continuous
operations without sacrificing safety.
Onshore or offshore, upstream to downstream, Fluke makes reliable tools that professionals in the oil
and gas industry can count on for accurate and consistent measurements. Tools designed for the demand-
ing oil and gas environment, the people who work there, and the challenges they face every day. With 65
years as the industry leader, they can feel confident that Fluke has the solutions they need to keep the oil
and gas industry flowing.
See our full line of innovative products at www.fluke.com