Product Manual

281, 282, 284
Users Manual
Introduction
Pressing the UTILITY key calls a list of menus which give access to various system
operations including storing and recalling set-ups from non-volatile memory, error
messages, power-on settings and calibration.
Storing and Recalling Set-ups
Complete waveform set-ups can be stored to or recalled from non-volatile RAM using
the menus called by the
store… and recall… soft-keys.
Pressing the
store… soft-key (or the STORE front panel key, in the case of multi-
channel instruments) calls the store screen:
Save to store No: 1
execute
Nine stores are available, numbered 1 to 9 inclusive. Select the store using the rotary
control or direct keyboard entry and press
execute to implement the store function.
Pressing
recall… (or the RECALL front panel key) calls the recall screen:
Recall store No: 1
set defaults
execute
In addition to the user-defined stores, the factory defaults can be reloaded by pressing the
set defaults
soft-key. Note that loading the defaults does not change any arbitrary
waveforms, the set-ups stored in memories 1 to 9, or the RS232/GPIB interface settings.
Channel Waveform Information
Information about each channel’s waveform memory can be viewed by pressing the
chan wfm info…
soft-key:
CHANNEL WFM INFO:
waveforms: 1
free mem: 65436
exit
For each channel selected (using the channel
SETUP keys), the number of waveforms
and the free memory on that channel are shown.
14-2