Product Manual

Remote Operation
Remote Commands16
16-19
FORCETRG Force a trigger to the selected channel. Will
function with any trigger source except
MANUAL specified.
Modulation Commands
MOD <cpd> Set the modulation source to <OFF>,
<EXT> or <PREV>.
MODTYPE <cpd> Set the modulation type to <AM> or
<SCM>.
AMDEPTH <nrf> Set the depth for amplitude modulation to
<nrf> %.
SCMLEVEL <nrf> Set the level for SCM to <nrf> Volts.
SUM <cpd> Set the sum source to <OFF>, <EXT> or
<PREV>.
SUMATN <cpd> Set the sum input attenuator to <0dB>,
<10dB>, <20dB>, <30dB>, <40dB>
or <50dB>.
SUMRATIO <nrf> Set the sum ratio to <nrf>.
Phase Locking Commands
REFCLK <cpd> Set the
REF CLOCK IN/OUT to <IN>,
<OUT>, <MASTER> or <SLAVE>.
ABORT Aborts an external phase locking operation.
PHASE <nrf> Set the generator phase to <nrf> degrees.
This parameter is used for phase locking
and trigger/gate mode start/stop phase.
LOCKMODE <cpd> Set the channel lock mode to <INDEP>,
<MASTER>, <FTRACK> or <SLAVE>.
LOCKSTAT <cpd> Set the inter-channel lock status to <ON>
or <OFF>.
Status Commands
*
CLS
Clear status. Clears the Standard Event Status
Register, Query Error Register and Execution
Error Register. This indirectly clears the
Status Byte Register.
*
ESE <nrf>
Set the Standard Event Status Enable Register
to the value of <nrf>.
*
ESE?
Returns the value in the Standard Event Status
Enable Register in <nr1> numeric format.
The syntax of the response is <nr1><rmt>.