Product Manual

291, 292, 294
Users Manual
17-26
PULTRNWID <nrf1>,<nrf2> Set the width of pulse−train pulse number
<nrf1> to <nrf2> sec.
QER? Query and clear query error number register.
REFCLK <cpd> Set the
REF CLOCK IN/OUT to <IN>,
<OUT>, <MASTER> or <SLAVE>.
SCMLEVEL <nrf> Set the level for SCM to <nrf> Volts.
SETUPCH <nrf> Select channel <nrf>
SEQCNT <nrf1>,<nrf2> Set count for sequence segment <nrf1> to
<nrf2>.
SEQSEG <nrf>,<cpd> Set the status of sequence segment <nrf> to
<ON> or <OFF>.
SEQSTEP <nrf>,<cpd> Set the ‘step on’ parameter for sequence
segment <nrf> to <COUNT>,
<TRGEDGE> or <TRGLEV>.
SEQWFM <nrf>,<cpd> Set the ‘waveform’ parameter for sequence
segment <nrf> to <cpd>.
SUM <cpd> Set the sum source to <OFF>, <EXT> or
<PREV>.
SUMRATIO <nrf> Set the sum ratio to <nrf>.
SWPCENTFRQ <nrf> Set the sweep centre frequency to <nrf> Hz.
SWPDIRN <cpd> Set the sweep direction to <UP>, <DOWN>,
<DNUP> or <UPDN>.
SWPMKR <nrf> Set the sweep marker to <nrf> Hz.
SWPSPACING <cpd> Set the sweep spacing to <LIN> or <LOG>.
SWPSPAN <nrf> Set the sweep frequency span to <nrf> Hz.
SWPSTARTFRQ <nrf> Set the sweep start frequency to <nrf> Hz.
SWPSTOPFRQ <nrf> Set the sweep stop frequency to
<nrf> Hz.
SWPSYNC <cpd> Set the sweep sync <ON> or <OFF>.
SWPTIME <nrf> Set the sweep time to <nrf> sec.
SWPTYPE <cpd> Set the sweep type to <CONT>, <TRIG> or
<THLDRST> .
SYNCOUT <cpd> Set the sync output <ON>, <OFF>, <AUTO>,
<WFMSYNC>, <POSNMKR>, <BSTDONE>,
<SEQSYNC>, <TRIGGER>, <SWPSYNC>
or <PHASLOC>.
SYSCLKFRQ <nrf> Set the frequency of the system clock to
<nrf> Hz.
SYSCLKSRC <cpd> Set the source of the system clock to <INT>
or <EXT>.
TONEEND <nrf> Delete tone frequency number <nrf> thus
defining the end of the list.