User Guide

Technical Data
•
Two separate channels;
measure, source and view
process signals simultaneously
•
Measure volts, mA, RTDs,
thermocouples, frequency, and
resistance to test sensors
and transmitters
•
Source/simulate volts, mA,
thermocouples, RTDs, frequency,
and pressure to calibrate
transmitters
•
Measure or *source pressure
using any of 29 Fluke 700Pxx
Pressure Modules
•
Source mA with simultaneous
pressure measurement to
conduct valve and I/P tests
•
Perform fast linearity tests with
auto step and auto ramp features
•
Power transmitters during test
using 24 V loop supply and
simultaneous mA measurement
•
Store frequently-used test setups
for later use
•
Three-year warranty
*Pressure pump required
Fluke 726
Precision Multifunction
Process Calibrator
726 features:
•
More precise measurement and
calibration source performance,
accuracies of 0.01%.
•
Transmitter error% calculation,
interpret calibration results
without a calculator
•
Memory storage for up to 8
calibration results, return stored
calibration data from the field
for later analysis
•
Frequency totalizer and fre-
quency pulse train source mode
for enhanced flowmeter testing
•
HART mode inserts 250 ohm
resistor in mA measure and
source for compatibility with
HART instrumentation
•
Integrated pressure switch test
allows you to capture the set,
reset and deadband of a switch
•
Custom RTD curves, add calibra-
tion constants for certified RTD
probes for enhanced tempera-
ture measurement.
•
New voltage input protection
design for improved reliability
More Calibration Power!
The Fluke 726 Precision Multifunction
Process Calibrator is designed specifi-
cally for the Process industry with
broad workload coverage, calibration
power and unsurpassed accuracy in
mind. The 726 measures and sources
almost all process parameters and
can calibrate almost anything. The 726
will also interpret results without the
help of a calculator and store meas-
urement data for later analysis.
Pressure
Enabled
For more detailed information visit www.fluke.com/726
Test Equipment Depot - 800.517.8431
- 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com