User's Manual

Manual Supplement 287/289 Users
3 1/13
On page 4, replace the Symbols Table with:
Symbol Description Symbol Description

AC (Alternating Current or Voltage)

Fuse

DC (Direct Current or Voltage)

Double Insulated

Hazardous voltage

Important Information; refer to manual

Battery (Low battery when shown on the
display)

Earth ground

Continuity test or continuity beeper tone

Conforms to relevant Canadian and US standards

Conforms to European Union directives

Conforms to relevant Australian standards

Underwriters Laboratory listed product

Inspected and licensed by TÜV Product Services
CAT II
Measurement Category II is applicable to test
and measuring circuits connected directly to
utilization points (socket outlets and similar
points) of the low-voltage MAINS installation.

This product complies with the WEEE Directive
(2002/96/EC) marking requirements. The affixed
label indicates that you must not discard this
electrical/electronic product in domestic household
waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this
product is classed as category 9 "Monitoring and
Control Instrumentation" product. Do not dispose of
this product as unsorted municipal waste. Go to
Fluke’s website for recycling information.
CAT III
Measurement Category III is applicable to test
and measuring circuits connected to the
distribution part of the building’s low-voltage
MAINS installation.
CAT IV
Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.

Conforms to relevant South Korean EMC Standards.