User manual
Model 113 English Instruction Sheet
Page 2
• Do not use the Meter around explosive gas, vapor or in
wet environments.
• When using test leads or probes, keep your fingers
behind the finger guards.
• Only use test leads that have the same voltage,
category, and amperage ratings as the meter and that
have been approved by a safety agency.
• Remove test leads from Meter before opening the
battery door or Meter case.
• Comply with local and national safety requirements
when working in hazardous locations.
• Use proper protective equipment, as required by local or
national authorities when working in hazardous areas.
• Avoid working alone.
• Check the test leads for continuity before use. Do
not use if the readings are high or noisy.