Nuclear Associates 17-800, 17-801 17-802, 17-803 17-805 & 07-609 Invisible Fluorescent Marking Kit User Manual March 2005 Manual No. 38656 Rev. 2 ©2004, 2005 Fluke Corporation, All rights reserved.
(Blank Page)
Table of Contents Section 1: 1.1 General Information................................................................................... 1-1 General Information ..................................................................................... 1-1 Section 2: 2.1 2.1.1 2.1.2 2.2 2.3 2.3.1 2.4 2.5 Operation.................................................................................................... 2-1 Screen Check Lamp (Model 17-800) ...........................................................
(Blank Page)
General Information General Information 1 Section 1 General Information 1.1 General Information Indelible skin paints and inks have generally been used to outline a therapy field for positioning purposes. However, when exposed skin surfaces (head, neck, etc.) are involved, such conspicuous markings have presented a disturbing cosmetic problem, especially to outpatients in constant contact with other people. The Invisible Fluorescent Marking Kit overcomes this difficulty.
Nuclear Associates 17-800,801,802,803,805;07-609 Operators Manual (Blank page)
Operation Screen-Check Lamp (Model 17-800) 2 Section 2 Operation 2.1 Screen-Check Lamp (Model 17-800) 2.1.1Operation 1. Plug the line cord into a convenient 115 V/60 Hz power source (220 V/60 Hz for Model 07-609-2200). 2. Grasp the lamp case by the handle. Depress the momentary switch and hold it down for a few seconds. 3. Release the switch and the unit will light. If it doesn't, repeat steps 2 and 3. 2.1.2Screen Cleanliness Check 1.
Nuclear Associates 17-800,801,802,803,805;07-609 Operators Manual 2.4 Wall Mount & Holder (Model 17-802) An optional rubber wall mount is also available for holding the UV light source to a wall or other vertical surface. The holder should be wall-mounted with its slotted portion positioned at the bottom. To install, peel the paper backing off the holder and press the adhesive surface firmly against the mounting surface. The holder also contains holes for screw mounting to a wood surface, etc.
(Blank Page)
Fluke Biomedical Radiation Management Services 6045 Cochran Road Cleveland, Ohio 44139 440.498.2564 120 Andrews Road Hicksville, New York 11801 516.870.0100 www.flukebiomedical.
