Brochure

Clamp meter specications cont.
Leakage Process Earth ground Power quality
360* 773 1630 345
Measurements
AC current
• • •
AC volts
•
Resistance
Continuity
•
DC Volts
•
DC current
• •
True-rms
• •
Frequency
•
Min/Max/Avg
•
4-20 mA (0.01 mA resolution)
•
Temperature
Capacitance
Earth ground loop resistance
•
Special features
Inrush current mode
•
Low Pass filter
•
Harmonics, power, data logging
•
18-inch iFlex Flexible Current Probe
10-inch iFlex Flexible Current Probe
Remote display
Flashlight/torch
Display
Display hold
• • • •
Backlight
• • •
Graphing display
•
Specifications
Jaw opening 40 mm (1.5 in) 4.5mm (0.177 in) 35 mm (1.38 in) 58 mm (2.3 in)
Max wire size 1250 MCM 6 AWG 1000 MCM 750 MCM or three
500 MCM
Current range ac rms 0 to 60 A 0 to 35 A 0 to 1400 A
Accuracy ac current (50/60 Hz) 1 %
± 5 counts
2 %
± 3 counts
± 3 %
± 5 counts
AC Response Averaging True-rms True-rms
Current range dc 0 to 99.9 mA 0 to 2000 A
Accuracy dc current 4-20 mA is 0.2 %
± 5 counts
± 1.5 %
± 5 counts
Voltage range ac 0 to 825 V
Accuracy ac voltage ± 1 %
± 5 counts
Voltage range dc 0 to 825 V
Accuracy dc voltage ± 1 %
± 5 counts
Resistance range
0 to 1500 Ω
Frequency measurement range 15 to 1000 Hz
Unit power
Auto off
• • • •
Warranty and safety
Warranty (years) 1 3 1 2
Category ratings (EN61010-1) CAT III 300 V Cat II 300 V CAT III 300 V CAT IV 600 V,
CAT III 1000 V
*Not available for sale in Canada
Fluke. Keeping your world up and running.
®
©2008-2012 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 6/2012 3363537C_EN
Modification of this document is not permitted
without written permission from Fluke Corporation.
Education/Support
ABCs of Clamp Meters
What is a clamp meter
and what can it do? What
measurements can be made
with a clamp meter? How
do you get the most out of a
clamp meter? Which clamp
meter is best suited to the
environment the meter will
be used in? Find the answers
to these questions and more
in our Clamp Meter ABCs
application note. www.fluke.
com/clampABCs
mA Loop Webinar
Learn how to test and
troubleshoot 4 mA to 20
mA control loops with this
Fluke webinar. Visit the
link below to register and
participate. www.fluke.com/
mALoopWebinar
Machine Health Newsletter
Simple as a screw driver and
useful as a pair of work boots:
that’s our goal for Machine
Health. We want to make
your job easier, and help you
keep the machines you care
for up, running and delivering
value. Visit the link below to
find ideas and information
on troubleshooting
techniques and preventative
solutions. www.fluke.com/
machinehealth
Motors and Drives
Solution Center
Subscribe to this bi-monthly
newsletter and learn about
machine health—how to
anticipate and identify
problems and how to
troubleshoot them. www.
fluke.com/motors_solutions