User's Manual

ManualsBrandsFluke ManualsClamp MetersFluke 376

Manual Supplement



Manual Title: 374/375/376 Calibration Supplement Issue: 4

Part Number: Web Only Issue Date: 10/12

Print Date: December 2010 Page Count: 3

Revision/Date:

This supplement contains information necessary to ensure the

accuracy of the above manual.

Summary of content (4 pages)

PAGE 1
Manual Supplement Manual Title: Part Number: Print Date: Revision/Date: 374/375/376 Calibration Supplement Issue: Web Only Issue Date: December 2010 Page Count: 4 10/12 3 This supplement contains information necessary to ensure the accuracy of the above manual. © 2011-2012 Fluke Corporation. All rights reserved.
PAGE 2
374/375/376 Calibration Manual Supplement Change #1 On pages 9 and 10 replace Tables 2, and 3 with: Table 2. Performance Tests Test (Switch Position)  AC Volts  DC Volts  Ohms  Capacitance Meter Reading Limit Calibrator Output 374 375 376 High 10 V, 50 Hz X X X 9.4 V 10.7 V 500 V, 50 Hz X X X 492.0 V 508.0 V 900 V, 50 Hz - - X 882.0 V 919.0 V 500 V, 500 Hz X X X 492.0 V 508.0 V -500 V X X X -505.5 V -494.5 V 10 V X X X 9.4 V 10.6 V 500 V X X X 494.
PAGE 3
Manual Supplement 374/375/376 Calibration Test (Switch Position)  AC Amps (with 50-turn Coil) C DC Amps (with 50-turn Coil) D iFlex Current Probe (with Simulation) D iFlex Current Probe (with 50-turn Coil) Meter Reading Limit Calibrator Output 374 375 376 Low High 0.2 A, 50 Hz X X X 9.3 A 10.7 A 10 A, 50 Hz X X X 489.5 A 510.5 A 18 A, 50 Hz - - X 881.5 A 918.5 A 6 A, 440 Hz X X X 292.0 A 308.0 A 0.2 A X X X 9.3 A 10.7 A 10 A X X X 489.5 A 510.
PAGE 4
374/375/376 Calibration Manual Supplement Change #2 On page 9, add the following after the first sentence: For the iFlex simulated tests you need the leads and probes listed in the required equipment list. They are used to connect the calibrator output to the iFlex input. Calibrator Output HI goes to the iFlex 2 mm jack (on the far left) and the Calibrator Output LO goes to the black COM jack.