Product Manual

Documenting Process Calibrator

Functions

A summary of functions supplied by the Product is shown in

Table 2. More features include:

• Analog display for easy to read measurements when

inputs are unstable.

• Localized display (5 languages). See “Display

Languages”.

• Thermocouple (TC) input/output jack and internal

isothermal block with automatic reference-junction

temperature compensation. Or manually record an

external temperature reference.

• Test results storage.

• Data logging. Automatically log up to 8,000 data points.

• A USB computer interface to upload or download tasks,

lists, and results.

• Automatic calibration procedures for transmitters and

limit switches when you use split screen

MEASURE/SOURCE mode.

• Transmitter mode in which the Product can be

configured to emulate the functions of a process

instrument.

• Calculator feature with square-root function, and

accessible registers that contain measure and source

values.

• Damp feature (smoothes the last several readings),

with display indicator of damped status.

• Display of measurements in engineering units, percent

of scale, square-law inputs, or custom units.

• Min/Max feature captures and shows minimum and

maximum measured levels.

• Set source values to engineering units, percent of

scale, square-law outputs, or custom units.

• Manual and automatic stepping and an output ramp

feature for testing limit switches. Trip detect is either a 1

V change or a continuity status change (Open or Short)

from one ramp increment to the next.

For performance testing and calibration instructions,

download the 753/754 Calibration Manual from Fluke’s

website.