Product Manual

Documenting Process Calibrator
Date and Time
27
To set the time and date displays:
1. Push s.
2. Push the Next Page softkey. See Figure 9.
gks38s.bmp
Figure 9. Time and Date Display
3. Push  and  to move the cursor to the necessary
parameter, then push  or the Choices softkey to
choose a setting for that parameter.
For example, the display in Figure 10 is shown after
you select Date Format.
gks39s.bmp
Figure 10. Edit the Date Format
4. Push  or  to move the cursor to the necessary date
format.
5. Push  to select the format and go back to Setup
mode.
6. Choose a different selection or push the Done softkey
or s to save the settings and exit Setup mode.