Product Manual

753/754
Users Manual
86
10. Note the LOG annunciator next to MEASURE. Push
the Start Logging softkey to record data.
11. The Product continues to keep data points until the
duration has passed, or until the Done softkey is
pushed. If logging is stopped by these procedures the
Product keeps the data as a memory item that can be
uploaded to a host computer that uses DPCTrack2
application software. See “Communication with a PC”.
Record Min and Max Measurements
You can set the display to record and show the maximum
(max) and minimum (min) readings. Min and Max readings
are always undamped, even if Dampen is On. Push the
More Choices softkey twice, then push the Min Max
softkey to energize this feature. Push  to reset the Min
Max registers. Push the Min Max softkey again to revert to
the normal display. Figure 42 shows the display with Min
Max on.
gks55s.bmp
Figure 42. Min Max Screen