User manual

Pressure Gauge
7
Table 2. Display and Buttons (cont.)
Item Function

MIN MAX records minimum and maximum
pressure values and saves them in
memory. Push  to show maximum
(MAX) indication. Push again to show
minimum (MIN) indication. After 2 seconds,
the gauge goes back to live operation.
To clear the MIN MAX memory values,
push and hold  for 2 seconds until CLr
is shown.
In Configure Mode, push  () to move
backward through the menus.

Push to go to setup and configuration
menus.

Push to make a selection. When the
Product is not in Configuration mode, push
to turn on the backlight. Push again to turn
off the backlight.
Item Function
 ¼ inch NPT Connector
 Pressure Display
 Engineering Units
 Bargraph