Item Brochure

ManualsBrandsFluke ManualsConstruction Tools2700G Series Reference Pressure Gauge

2700G Series

Reference

Pressure Gauges

Features

• Precision pressure measurement from 100 kPa

(15 psi) to 70 MPa (10 000 psi)

• Accuracy to 0.02% of full scale

• Easy-to-use, rugged construction for reliable

performance

• Combine with the 700PTPK or 700HTPK pump kits

for a complete portable pressure testing solution for

up to 4 MPa (600 psi) with the PTP-1 pneumatic

pump and up to 70 MPa (10 000 psi) with the

HTP-2 hydraulic pump

• Combine with the P5510, P5513, P5514, or P5515

Comparison Test Pumps for a complete bench top

pressure calibration solution

• Test port is 1/4 NPT Male. 1/4 BSP and M20 X 1.5

adaptors are included standard

• USB communications cable and universal power

supply included standard

Technical Data

The 2700G Reference Pressure Gauges provide

best-in-class measurement performance in a rugged,

easy-to-use, economical package. Improved measure-

ment accuracy allows it to be used for a wide variety

of applications. It is ideal for calibrating pressure

measurement devices such as pressure gauges, trans-

mitters, transducers, and switches. In addition, it can

be used as a check standard or to provide process

measurements with data logging.

The 2700G has an easy-to-use interface that

allows you to configure the sampling rate, tare value,

damping, and auto-off time interval as well as reset

the min/max pressure. You can also view the remaining

battery life. Select from 21 different standard engi-

neering units, including bar, in H

O, kPa, MPa, and psi.

In addition, the supervisor menu can be used to set

one custom engineering unit. To ensure against incor-

rect measurements, each of the above functions can

be locked from use through the supervisor menu.

The 2700G Reference Pressure Gauge can be

combined with the Fluke Calibration P5500 series of

comparison test pumps to make a complete pressure

calibration system. The unique test port design of the

P5500 series allows for hand tight connection of the

2700G without the use of PTFE tape.

Combine the 2700G gauge with the P5510, P5513, P5514 (shown

here) or P5515 Comparison Test Pumps for a complete bench top

pressure calibration solution.

Summary of content (4 pages)

PAGE 1
2700G Series Reference Pressure Gauges Technical Data Features • Precision pressure measurement from 100 kPa (15 psi) to 70 MPa (10 000 psi) • Accuracy to 0.
PAGE 2
P5510 Pneumatic Comparison Pump • • • • Pressure range: 0 to 2 MPa (300 psi) Vacuum range: 0 to 80 kPa (24 inHg) Built-in hand pump as pressure/vacuum source High-quality needle valve for fine control P5513 Pneumatic Comparator • • • • Pressure range: 0 to 20 MPa (3000 psi) High pressure pneumatic operation Screw press for fine pressure adjustment High-quality needle valve for metering in supply pressure P5514 Hydraulic Comparison Pump • • • • Pressure range: 0 to 70 MPa (10 000 psi) Bench mount design
PAGE 3
Model Range Resolution 2700G-BG100K -15 psi to 15 psi -100 kPa to 100 kPa 0.001 psi 0.0001 bar Uncertainty (k=2) Burst pressure 45 psi 0.3 MPa Note 1 2700G-BG200K -15 to 30 psi -100 kPa to 200 kPa 0.001 psi 0.0001 bar 90 psi 0.6 MPa Note 1 2700G-BG700K -12 psi to 100 psi -80 kPa to 700 kPa 0.01 psi 0.0001 bar 1000 psi 7 MPa Note 2 2700G-BG2M -12 psi to 300 psi -80 kPa to 2 MPa 0.01 psi 0.001 bar 2000 psi 14 MPa Note 2 2700G-BG3.5M -12 psi to 500 psi -80 kPa to 3.5 MPa 0.01 psi 0.
PAGE 4
Order information Model Description 2700G-BG100K Reference Pressure Gauge, -15 to 15 psi (-100 to 100 kPa) 2700G-BG200K Reference Pressure Gauge, -15 to 30 psi (-100 to 200 kPa) 2700G-BG700K Reference Pressure Gauge, -12 to 100 psi (-80 to 700 kPa) 2700G-BG2M Reference Pressure Gauge, -12 to 300 psi (-80 kPa to 2 MPa) 2700G-BG3.5M Reference Pressure Gauge, -12 to 500 psi (-80 kPa to 3.