323/324/325 Clamp Meter Bedienungshandbuch PN 4045153 May 2012 (German) © 2012 Fluke Corporation. All rights reserved. Printed in China. Specifications are subject to change without notice. All product names are trademarks of their respective companies.
BESCHRÄNKTE GARANTIE & HAFTUNGSBESCHRÄNKUNG Die Garantie für dieses Fluke-Produkt deckt Material- und Ausführungsdefekte für die Dauer von zwei Jahren ab dem Verkaufsdatum ab. Von dieser Garantie nicht abgedeckt sind Sicherungen, nichtaufladbare Batterien und Schäden, die durch äußere Einwirkungen, eigenes Verschulden, Mißbrauch, abnormale Betriebsbedingungen oder nicht-vorschriftsgemäße Bedienung entstanden sind.
Inhaltsverzeichnis Titel Seite Einführung .................................................................................................................. 1 Kontaktaufnahme mit Fluke........................................................................................ 1 Sicherheitsinformationen ............................................................................................ 2 Reinigen des Produkts .............................................................................................
323/324/325 Bedienungshandbuch ii
Einführung Die Strommesszangen Fluke 323/324/325 (nachfolgend: das Produkt) messen Wechsel- und Gleichspannung, Wechselstrom, Widerstand und Durchgang. Die Strommesszangen 324 und 325 können zusätzlich Kapazität und Berührungstemperatur messen. 325 kann auch Gleichstrom und Frequenz messen. Bitte beachten Sie, dass in allen Abbildungen die Strommesszange 325 gezeigt wird. Für Temperaturmessungen müssen Sie die das beiliegende Thermoelement des Typs K verwenden.
323/324/325 Bedienungshandbuch • Europa: +31 402-675-200 • Japan: +81-3-3434-0181 • Singapur: +65-6799-5566 • Weltweit: +1-425-446-5500 Oder besuchen Sie die Website von Fluke unter www.fluke.com. Zur Registrierung des Produkts http://register.fluke.com aufrufen. Um die aktuellen Ergänzungen des Handbuchs anzuzeigen, zu drucken oder herunterzuladen rufen Sie die folgende Website von Fluke auf: http://us.fluke.com/usen/support/manuals.
Clamp Meter Sicherheitsinformationen XW Warnung Um Personenschäden zu vermeiden, darf dieses Gerät nur gemäß Gebrauchsanweisung eingesetzt werden. Andernfalls kann der Schutz, den das Gerät bietet, beeinträchtigt werden. Zur Vermeidung von Stromschlag, Brand oder Verletzungen sind folgende Hinweise zu beachten: • Für die Messung ausschließlich die korrekte Messkreiskategorie (CAT) und Spannung sowie für die Stromstärke spezifizierte Messfühler, Messleitungen und Adapter verwenden.
323/324/325 Bedienungshandbuch 4 • Das Produkt nicht in der Nähe von explosiven Gasen, Dämpfen oder in dunstigen oder feuchten Umgebungen verwenden. • Den Betrieb auf die angegebene Messkreiskategorie, Spannung bzw. Nennstromstärke beschränken. • Nicht allein arbeiten. • Zwischen beliebigen Anschlüssen bzw. zwischen Anschlüssen und Masse niemals eine höhere Spannung als die angegebene Nennspannung anlegen. • Alle lokalen und nationalen Sicherheitsbestimmungen müssen befolgt werden.
Clamp Meter Sicherheitsinformationen • Alle Messfühler, Testelektrodenkabel und sämtliches Zubehör entfernen, die nicht für die Messung erforderlich sind. • Nur Messfühler, Messleitungen und Zubehör verwenden, die dieselbe Messkreiskategorie und Nennspannung wie das Produkt aufweisen. • Die Finger immer hinter der Griffbegrenzung der Messspitze halten. • Die Masseleitung immer vor der spannungsführenden Leitung anschließen und die spannungsführende Leitung immer vor der Masseleitung abklemmen.
323/324/325 Bedienungshandbuch • Vor Verwendung des Produkts das Gehäuse untersuchen. Nach Rissen oder herausgebrochenem Kunststoff suchen. Insbesondere auf die Isolierung um die Buchsen herum achten. • Vor Inbetriebnahme des Produkts alle Sicherheitsinformationen lesen. • Wenn das Produkt über längere Zeit nicht verwendet wird, müssen die Batterien entfernt werden, da sie sonst auslaufen und das Produkt beschädigen können.
Clamp Meter Sicherheitsinformationen Tabelle 1. Symbole Symbol Bedeutung Symbol Bedeutung B Wechselstrom (AC – Alternating Current) J Erde, Masse F Gleichstrom (DC – Direct Current) ~ Dieses Produkt nicht mit dem Hausmüll entsorgen. RecyclingInformationen sind auf der Website von Fluke zu finden. D Wechselstrom und Gleichstrom P Entspricht den Richtlinien der Europäischen Union. W Gefahr. Wichtige Informationen. Siehe Handbuch. T Schutzisoliert X Gefährliche Spannungen.
323/324/325 Bedienungshandbuch Tabelle 1. Symbole (Forts.) Symbol M CAT III Bedeutung Symbol Akku , CAT III-Ausrüstung ist so konzipiert, dass sie Schutz gegen impulsförmige Störsignale in fest installierten Anlagen bietet, beispielsweise in Verteilertafeln, Zuleitungen und kurzen Verzweigungsstromkreisen sowie in Beleuchtungssystemen großer Gebäude. CAT IV Bedeutung Anlegen bzw. Entfernen gefährlicher stromführender Leiter ist erlaubt.
Clamp Meter Reinigen des Produkts Reinigen des Produkts Reinigen Sie Ihr Messgerät regelmäßig mit einem feuchten Tuch und einem milden Reinigungsmittel. W Vorsicht Zur Vermeidung von Produktschäden, das Produktgehäuse nicht mit Scheuer- oder Lösungsmitteln reinigen. Um die Backen des Produkts zu reinigen: 1. Stellen Sie sicher, dass die Wirkstellen der Zange sauber sind. Sind unerwünschte Verschmutzungen (z.B. Rost) vorhanden, schließt die Zange nicht vollständig und es kommt zu Messfehlern. 2.
323/324/325 Bedienungshandbuch Technische Angaben Elektrische Spezifikationen Wechselstrom (Zangen) Bereich 323.....................................................400,0 A 324, 325.............................................(40,00; 400,0) A Auflösung 323.....................................................0,1 A 324, 325.............................................(0,01; 0,1) A Genauigkeit ............................................
Clamp Meter Technische Angaben Gleichspannung Bereich ...................................................600,0 V Auflösung ................................................0,1 V Genauigkeit.............................................1 % ±5 Ziffern Widerstand Bereich 323, 324.............................................(400,0; 4000) Ω 325.....................................................(400.0, 400,0; 40000) Ω Auflösung ................................................(0,1, 1, 10) Ω Genauigkeit............
323/324/325 Bedienungshandbuch Auflösung ................................................0,1 Hz Genauigkeit .............................................0,5 % ± 4 Ziffern Triggerlevel .............................................5 - 10 Hz, ≥ 10 A 10 - 100 Hz, ≥ 5 A 100 - 500 Hz, ≥ 10 A Berührungstemperatur (324, 325) Bereich ....................................................-10,0 °C bis 400°C Auflösung ................................................0,1 °C Genauigkeit .....................................
Clamp Meter Technische Angaben Betriebsluftfeuchte ..................................nicht kondensierend (< 10 °C) ≤ 90 % RH (bei 10 °C bis 30 °C) ≤ 75 % RH (bei 30 °C bis 40 °C) ≤ 45 % RH (bei 40 °C bis 50 °C) (ohne Kondensation) Betriebshöhenlage ..................................2.000 m Lagerungshöhenlage ..............................12.000 m EMI, EMC................................................Erfüllt alle Anforderungen von EN 61326-1 Temperaturkoeffizienten .........................
323/324/325 Bedienungshandbuch Das Messgerät 600 V 300 V CAT CAT 325 CAT 600 V CAT 300 V 2 TRUE RMS CLAMP METER 1 gtq008.
Clamp Meter Das Messgerät OFF 20 323 ON 324/325 ON MAXMIN k C FHz VA AC DC F gtq001.
323/324/325 Bedienungshandbuch 2:00 MIN MAX ON 2:00 gtq002.
Clamp Meter Das Messgerät CAT 600 V CAT 300 V CAT 600 V CAT 300 V 323, 324 325 325 TRUE RMS CLAMP METER 325 TRUE RMS CLAMP METER CAT CAT 600 V 300 V CAT CAT 600 V 300 V gtq003.
323/324/325 Bedienungshandbuch 323 V dc 323 V ac - V V 324, 325 V dc & V ac - V or V >30 V CAT 300 V gtq004.
Clamp Meter Das Messgerät CAT 600 V CAT 300 V CAT 600 V CAT 300 V 325 TRUE RMS CLAMP METER CAT CAT 600 V 300 V 325 TRUE RMS CLAMP METER CAT CAT 600 V 300 V 323 <70 324/325 <30 gtq005.
323/324/325 Bedienungshandbuch HOLD 325 TRUE RMS CLAMP METER CAT CAT 600 V 300 V 20 V > 30 V AC/DC & ZERO ZERO ZERO ZERO AC/DC AC/DC AC/DC 2 sec gtq006.
Clamp Meter Das Messgerät 324, 325 325 TRUE RMS CLAMP METER CAT CAT 600 V 300 V gtq009.
323/324/325 Bedienungshandbuch AAA gtq007.