Item Brochure

5 Fluke Calibration P3000 Series Pneumatic Deadweight Testers Model P3000
Air operated—single PCU
Model
P3012-KPA-P 1.5 to 100 kPa
P3012-MBAR-P 15 to 1 000 mbar
P3012-INH2O-P 5 to 400 inH
2
O
P3013-KPA-P 3 to 200 kPa
P3013- MBAR-P 30 to 2 000 mbar
P3013-INH2O-P 12 to 800 inH
2
O
P3014-BA R-P 0.2 to 10 bar
P3014-KGCM2-P 0.2 to 10 kgf/cm
2
P3014-PSI-P 3 to 150 psi
P3014-KPA-P 20 to 1 000 kPa
P3014-5MPA-P 0.02 to 1 MPa
P3015-BAR-P* 0.2 to 35 bar
P3015-KGCM2-P
*
0.2 to 35 kgf/cm
2
P3015-PSI-P* 3 to 500 psi
P3015-KPA-P* 20 to 3 500 kPa
P3015-MPA-P* 0.02 to 3.5 MPa
* -P indicates built-in pump optional.
Vacuum operated—
single PCU
Model
P 3011- K PA -P * 3 to 100 kPa
P 3011- M BA R -P * 30 to 1 000 mbar
P3011-INHG-P* 1 to 30 inHg
P3011-MMHG-P* 20 to 760 mmHg
* -P indicates built-in pump optional.
Liquid lubricated
Model
P3031-BAR 1 to 70 bar
P3031-KGCM2 1 to 70 kgf/cm
2
P3031-PSI 10 to 1 000 psi
P3031-KPA 100 to 7 000 kPa
P3031-MPA 0.1 to 7 MPa
P3032-BAR 1 to 140 bar
P3032-2KGCM2 1 to 140 kgf/cm
2
P3032-PSI 10 to 2 000 psi
P3032- KPA100 to 14 000 kPa
P3032-MPA 0.1 to 14 MPa
Options
Built-in pump (where applicable)
Fine Increment Weights (where applicable)
Conversion Weight Set to allow pressure increments in other pressure units
0.008 % Improved Accuracy (PressCal Software)
COMPASS for Pressure Calibration Software
Ordering information
Model Pressure range Vacuum range
P3022-KPA-P* 1.5 to 100 kPa 3 to 100 kPa
P3022-MBAR-P* 15 to 1,000 mbar 30 to 1 000 mbar
P3022-INH20-P* 5 to 400 inH
2
O 1 to 30 inHg
P3023-KPA-P* 3 to 200 kP 3 to 100 kPa
P3023-MBAR-P* 30 to 2 000 mbar 30 to 1 000 mbar
P3023-INH20-P* 12 to 800 inH
2
O 1 to 30 inHg
P3025-BAR-P* 0.2 to 35 bar 30 to 1 000 mbar
P3025-KGCM2-P* 0.2 to 35 kgf/cm
2
20 to 760 mmHg
P3025-PSI-P* 3 to 500 psi 1 to 30 inHg
P3025-KPA-P* 0.02 to 3.5 MPa 3 to 100 kPa
P3025-MPA-P* 0.02 to 3.5 MPa 3 to 100 kPa
* -P indicates built-in pump optional.
Air operated—dual PCU
Fluke Calibration
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (877) 355-3225 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.flukecal.com
©2011, 2015, 2017 Fluke Calibration.
Specications subject to change without notice.
Printed in U.S.A. 3/2017 3833551f-en
Pub-ID: 11744-eng
Modification of this document is not permitted
without written permission from Fluke Calibration.
Fluke Calibration.
Precision, performance, confidence.