Product Manual

P3800 Series
Users Manual
4-2
PISTON NUT B
PISTON NUT A
CYLINDER
O RING
PISTON COLUMN
PISTON
glf10.eps
Figure 4-1. Piston/Cylinder Removal
Cleaning
1. Use “non-fluffing”, non-abrasive, lint-free tissue or absorbent cloth. Hold the Piston
by the larger “head” end, and rub the tissue back and forth along its length.
2. To remove all traces of contamination, the piston can be cleaned in a suitable solvent.
W Caution
O-ring seals should not be immersed in solvents, as they will
become damaged. They should be wiped carefully with a new
tissue.
3. After removal from the solvent, using a NEW tissue, repeat the cleaning procedure
above.
4. Place piston carefully on a NEW tissue where it will not be damaged while the
cylinder is cleaned.