Product Manual
Table Of Contents
- Pressurements PressCal Users Manual
- 1. Overview
- 2. Setting Up PressCal
- 3. Setting Up Customer Details
- 4. Creating an Audit Trail
- 5. Performing a Calculation
- 6. Producing Certificates
- 7. Additional Features
- 8. Glossary and Pressure Equation
6-1
Chapter 6
Producing Certificates
Introduction
PressCal allows either automatic or manual generation of “Certificates of Calibration”.
Automatic Generation Extracts the results of a calculation and inserts them
automatically into the certificate of calibration.
Manual All calculation results are manually entered into the
“Certificate of Calibration”.
Managing New Certificates
Click on Certificate > New
4
within the “Menu Bar” and select either Auto or
Manual to open the “Certificate Front Page” window as shown in Figure 6-1. Complete
the details as described in Managing a Certificate Front Page, then click on Go to Cert
Panel to open the “Certificate of Calibration” window, as shown in Figure 6-2.
gmp10.bmp
Figure 6-1. Certificate Front Page Window