Product Manual

Remote Commands
Remote Command List 6
6-13
ISO_PRES_UNIT?
This command shows the isolated pressure unit.
Parameter: <None>
Response: <value>
where <value> is one of these:
PSI pounds per square inch
INH2O4C inches of water at 4 °C
INH2O20C inches of water at 20 °C
INH2O60F inches of water at 60 °F
CMH2O4C centimeters of water at 4 °C
CMH2O20C centimeters of water at 20 °C
MMH2O4C millimeters of water at 4 °C
MMH2O20C millimeters of water at 20 °C
BAR bars
MBAR millibars
KPA kilopascals
MPA megapascals
INHG inches of mercury at 0 °C
MMHG millimeters of mercury at 0 °C
KG/CM2 kilograms per square centimeter
Example: ISO_PRES_UNIT?
BAR
This example is an indication that the isolated pressure unit is
bars.
LOCAL
This command puts the Calibrator into the local condition, clearing the remote condition
(see the REMOTE command) and the front panel lockout condition (see the LOCKOUT
command). It duplicates the condition of when the IEEE-488 REN line to false.
Parameter: <None>
Response: <None>
Example: LOCAL
This example puts the instrument into the local condition,
clearing the remote condition and front panel lockout
condition, if enabled.