Product Manual

7526A
Users Manual
6-22
RANGELCK?
This command shows the DC voltage range lock status.
Parameter: <None>
Response: <value>
where <value> is one of these:
ON DC voltage range lock is on
OFF DC voltage range lock is off
Example: RANGELCK?
OFF
This example is an indication that the range lock is off.
REMOTE
This command puts the Calibrator into the remote condition. It duplicates the IEEE-488
REN (Remote Enable) message. When the Calibrator is in the remote condition, but not
locked out, only the LOCAL key is active. If the front panel is also locked out, no front
panel keys are active. See the LOCKOUT command. To unlock the front panel, use the
LOCAL command, or push the Calibrator power switch.
Parameter: <None>
Response: <None>
Example: REMOTE
This example places the Calibrator into the remote condition.