Product Manual

7526A
Users Manual
6-26
*SRE
Service Request Enable command. This command puts a byte into the Service Request
Enable (SRE) register. See the Service Request Enable Register (SRE) description in the
“Check Product Status” section of Chapter 5. Since bit 6 is not used (decimal value 64),
the maximum entry is 255 - 64 =191.
Parameter: <value>
where <value> is the decimal equivalent of the SRE byte, 0 to
191
Response: <None>
Example: *SRE 48
This example enables bits 4 (MAV) and 5 (ESB).
*SRE?
Service Request Enable query. This command shows the byte in the Service Request
Enable Register (SRE). See the Service Request Enable Register (SRE) description the
“Check Product Status” section of Chapter 5.
Parameter: <None>
Response: <value>
where <value> is the decimal equivalent of the SRE byte, 0 to
191
Example: *SRE?
48
This example is an indication that bits 4 (MAV), and 5 (ESB)
are enabled.
*STB?
Status Byte Register query. This command shows the byte in the Status Byte Register.
See the Status Byte Register (STB) description in the “Check Product Status” section of
Chapter 5.
Parameter: <None>
Response: <value>
where <value> is the decimal equivalent of the STB byte, 0 to
255
Example: * STB?
96
This example is an indication that bits 5 (ESB) and 6 (MSS)
are set.