Product Manual

7526A
Users Manual
6-30
TC_TYPE
This command sets the Thermocouple (TC) sensor type that is used for TC temperature
source and measurement. Typically, before you use the TC_TYPE command to select the
TC type, use the TSENS_TYPE command to select TC mode, and afterwards set the
output temperature with the OUT command, if applicable. A change in temperature
sensors sets the output to 0 °C.
Parameters: <value>
where <value> is one of these:
B B-type thermocouple
C C-type thermocouple
E E-type thermocouple
J J-type thermocouple
K K-type thermocouple
L L-type thermocouple
N N-type thermocouple
R R-type thermocouple
S S-type thermocouple
T T-type thermocouple
U U-type thermocouple
XK XK-type thermocouple
BP BP-type thermocouple
Z 1 mV/°C
Response: <None>
Example: TC_TYPE J
This example sets the thermocouple type to J-type.