Product Manual

Remote Commands
Remote Command List 6
6-35
ZERO_MEAS?
This command shows the zero offset for pressure modules, thermocouple millivolts, or
RTD ohms.
Parameter: <None>
Response: <zero offset>,<units>
where < zero offset > is the current offset. and where <units>
is one of these:
OHM Ohms
V DC volts (thermocouple millivolts)
or one of the pressure units listed with the
PRES_UNIT? command
Example: ZERO_MEAS?
1.060000E-01,PSI
This example is an indication that the pressure zero for the
connected module is 0.106 psi.