Product Manual

Introduction
Product Description 1
1-9
Primary Input/Output Display and Controls
Figure 1-3 shows the primary input/output display and controls.
SET
RECALL
LOCAL
EXP
AUTOSET
INPUT
OUTPUT
ZERO
RNG LOCK
C / FCJCDISPLAY
7 8 9
VOLTS
STBY
OPR
TYPE
UNITS
CE
ENTERSHIFT
TC
RTD
mA
456
12
0
3
1
4
2 3
gwp003.eps
Item Description

Display: A two-line, 16-character display that gives all visual user feedback for the
primary output and input operations. See the “Display Layout” and “Error Messages”
section of this chapter for more information.

Numeric and Secondary Function Keys: Output value data entry keys. Secondary
function selection per the text printed above the numeric key. Push  and then the
numeric key to select the function.

OUTPUT

Change RTD/Ohms or Thermocouple to output mode.

INPUT

Change RTD/Ohms or Thermocouple to input mode.

ZERO

Zero the input for Pressure, Thermocouple millivolts, or RTD
ohms.

SETUP

Adjust the LCD Contrast, LCD Backlight, and Remote Interface
Configuration as given in Chapter 5, “LCD and Remote Interface
Setup Procedures”.

CJC

Select internal or external cold junction compensation for
Thermocouple temperature measurements. When external
compensation is selected, XCJC is shown at the start of the
second line.
Figure 1-3. Primary Input/Output Display and Controls