Product Manual

7526A
Users Manual
6-4
Table 6-2. External Connection Commands
Command Description
FUNC?
Shows the current output, measurement, or calibration function selected on
the isolated and primary displays, in that sequence .
HART? Shows the HART resistor setting for the isolated milliamp range, ON or OFF.
HART_OFF Turns off the HART resistor on the isolated milliamp range.
HART_ON Turns on the HART resistor on the isolated milliamp range.
ISO_PRES_UNIT Sets the isolated display pressure units.
ISO_PRES_UNIT? Shows the isolated display pressure units.
LOOP_POWER?
Shows the 24V loop power setting for the isolated milliamp range, ON or
OFF.
LOOP_POWER _OFF Turns off the 24V loop power on the isolated milliamp range.
LOOP_POWER _ON Turns on the 24V loop power on the isolated milliamp range.
PRES_UNIT Sets the primary display pressure units.
PRES_UNIT? Shows the primary display pressure units.
RTD_TYPE Sets the Resistance Temperature Detector (RTD) type.
RTD_TYPE? Shows the Resistance Temperature Detector (RTD) type.
TC_REF
Selects the internal temperature sensor or an external reference value for cold
junction compensation of thermocouple (TC) source and measurement.
TC_REF?
Shows the source of the temperature that is used for cold junction
compen sation of thermocouple (TC) source and measurement.
TC_TYPE Sets the thermocouple (TC) type.
TC_TYPE? Shows the thermocouple (TC) type.
TSENS_TYPE Sets temperature mode, RTD or TC.
TSENS_TYPE? Shows the temperature mode.
Table 6-3. Output Commands
Command Description
OPER
Starts the Calibrator output if it is in standby mode.
OPER? Shows the operate/standby mode setting.
OUT Sets the output of the Calibrator.
OUT? Shows the current output value of the Calibrator.
RANGE? Shows the current output range, for voltage and current only.
RANGELCK Locks the current output range, for voltage only.
RANGELCK? Shows the RANGELOCK condition, for voltage only.
STBY Stops the Calibrator output if it is in operate mode.